![pageSearch](/themes/hestia/images/page-search.webp)
Category
- Scissor Lift
- Vehicle Lift
- Air Hydraulic Jacks
- Exhaust Extraction
- Brake Disc Lathe
- Two Post Lift
- Four Post Lift
- Parts for Lift
- Jacks for Truck and Bus
- Parts of Air Hydraulic Jack
- Fix Type Exhaust Extraction
- Mobile Type Exhaust Extraction
- High Quality Brake Disc Lathe
- Hydraulic Cylinders
- For Agricultral Machinery
- For Aerial Working Equipment
![Assembly Line Laser Marking Electronic Soldering Iron Soldering Smoke Exhaust](/uploads/s/ae75836f82b84ec8a61684e949664ff5.webp)
Assembly Line Laser Marking Electronic Soldering Iron Soldering Smoke Exhaust
Overview Product Name Assembly Line Solder Smoking Exhaust Hood Product Parameters Detailed Photos Product Description I
Basic Info
Model NO. | CZX-SH-234 |
Maximum Air Velocity | 30m/S |
Bell Mouth Diameter | 180mm,150mm,230mm |
Iron Bracket Length | 55cm |
Application 1 | Electronic Factory Soldering |
Application 2 | Smoke Exhaust |
Application 3 | Moxibustion |
Application 4 | Odor Exhaust |
Application 5 | Production Line Exhaust System |
Application 6 | R&D Room |
Application 7 | Chemical |
Application 8 | Machinery |
Application 9 | Welding Air Equipment |
Application 10 | Electronic Factory |
Transport Package | Carton Packing, Ply Wooden Packing |
Specification | 2.5inch, 3inch, 4inch |
Trademark | DGCZXRP |
Origin | China Mainland |
HS Code | 8414809090 |
Production Capacity | 20000pieces/Month |
Product Description
Product Name
Assembly Line Solder Smoking Exhaust Hood
Product Parameters
1).Product Specifications | |||||
type | bell mouth diameter | connection size | iron bracket length | temperature range | maximum air velocity |
2.5inch | 180mm | 65mm | 55cm | -30ºC to +140ºC | 30m/s |
3inch | 150mm | 75mm | 55cm | -30ºC to +140ºC | 30m/s |
4inch | 230mm | 100mm | 55cm | -30ºC to +140ºC | 30m/s |
2).Application | |||||
1. electronic company, used in production line exhaust system | |||||
2. R&D room, chemical, machinery and other local small air pollution smoke and exhaust. Exhaust system for production line, R&D room, chemical, machinery and other local air pollution smoke and exhaust, electronic factory welding air equipment, etc. | |||||
3.electronics factory, etc. | |||||
3).Usage | |||||
For the rectangular or circular exhaust air duct on the production line, a small round hole is opened above each work point, and the branch pipe and the seat are usually connected with a fume shield, which is fixed on the side or bottom of the air duct. When the technician below needs to solder and smoke, fix the base lock of the whole set of solder fume hood with switch on the table and hang it upside down at any fixed point. According to the most appropriate position and direction of the smoke during soldering, it will be transparent and smooth. The flat horn cover is about 10 cm away from the solder port to accept the flue gas, etc. |
Detailed Photos
Product Description
Installation Instructions
Product Application
Packaging & Shipping
PACKAGE:Standard export carton packing, PLY WOODEN packing
International Experiance
After Sales Services
1.Reply in 24 hours.2.In time response and professional suggestions.3.Replacement product and tailor-made product both can do. 4.Small trial order accepted.5.Certification, complete certificates,like CE, EU,Rohs, FDA.6.Good quality and compe
Contact Person
Celina Du
Dongguan Zixi Rubber & Plastic New Material